BODY LOWER BACK PANEL REINFORCEMENT CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A005FFX

  1. REMOVAL

    Symbol meaning
    A005FLT Remove Weld Points
    A005FF2 Cut and Join Location
    A005FJTE01

  2. INSTALLATION

    Symbol meaning
    A005FJF Plug Weld
    A005FGA Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. After welding, apply body sealer to the corresponding parts. (See the paint / coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FEPE01
    *1 [LH Side]
    *2 [RH Side]