BACK DOOR OPENING TROUGH ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A005FLT Remove Weld Points
    A005FEI Remove Weld Points
    A005FG3 Remove Weld Points

      REMOVAL POINT

    1. Remove the quarter panel rear extension and roof side inner rear panel at the same time.

    A005FJYE02
    *a Quarter Panel Rear Extension
    *b Roof Side Inner Rear Panel

  2. INSTALLATION

    Symbol meaning
    A005FJF Plug Weld
    A005FIA Plug Weld
    A005FIX Plug Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. After welding, apply body sealer to the corresponding parts. (See the paint / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FGEE01
    *1 Quarter Panel Rear Extension
    *2 Back Door Opening Lower Reinforcement
    *3 Roof Side Inner Rear Panel