CENTER BODY PILLAR ASSEMBLY REPLACEMENT

A005FEN

  1. REMOVAL

    Symbol meaning
    A005FLT Remove Weld Points
    A005FG3 Remove Weld Points
    A005FF2 Cut and Join Location
    A005FLQ Cut Location for Supply Parts

      REMOVAL POINT

    1. *1 is reused.

    A005FGIE01

  2. INSTALLATION

    Symbol meaning
    A005FJV Spot Weld
    A005FJF Plug Weld
    A005FIX Plug Weld
    A005FF2 Cut and Join Location
    A005FGA Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. If the entire supply part is not needed, remove the part of the supply part that is needed.

    4. Before temporarily installing the new parts, weld the center body pillar reinforcement and No. 1 inner pillar with the standard number of welding points.

    5. After welding the center body pillar reinforcement and No. 1 inner pillar to the vehicle side, install the rocker outer panel and *1.

    6. After welding, apply the foamed sealing material to the corresponding parts. (See the paint / coating)

    7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FK9E01
    A005FMW
    A005FFEE01