FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. REMOVAL

    Symbol meaning
    A005FLT Remove Weld Points
    A005FG3 Remove Weld Points
    A005FF2 Cut and Join Location

      REMOVAL POINT

    1. After removing the *1, remove the front side member.

    2. Carefully cut the front side member so not to damage *2.

      Reference Value
      Area Measurement Area Measurement
      *a 310 mm (12.20 in.) *b 30 mm (1.18 in.)
      *c 310 mm (12.20 in.) *d 232 mm (9.13 in.)
      *e 47 mm (1.85 in.) - -
    A005FLPE01
    A005FMIE01
    A005FHCE01

  2. INSTALLATION

    Symbol meaning
    A005FLT Remove Weld Points
    A005FJF Plug Weld
    A005FIX Plug Weld
    A005FGA Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. Divide a new part of front side member reinforcement in to *1 at the weld points.

    4. Attach front side member after attaching *1 to the vehicle for attaching the new part.

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FK0E01
    *1 Front Side Member Outer Plate
    A005FFAE01