UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Measure points with the engine under cover removed.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Bumper Cover Installation Bolt M6 (0.24)
B, b Front Suspension Member Installation Bolt M12 (0.47)
C, c Front Suspension Member Installation Bolt M14 (0.55)
D, d Front Floor Pan Standard Hole φ20 (0.79)
A005FIFE01
*1 mm
*2 (in.)