ENGINE COMPARTMENT REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Measure points with the front fender to cowl side No. 2 seal removed.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Bumper Cover Installation Clip -
B, b Headlight Installation Screw -
C, c Front Fender Installation Bolt M6 (0.24)
D, d Front Fender Installation Bolt M6 (0.24)
A005FEKE01
*1 mm
*2 (in.)