FRONT SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Suspension Lower Arm Installation Hole φ16 (0.63)
B, b Front Suspension Crossmember Installation Hole (Lower) φ19 (0.75)
C, c Steering Gear Installation Hole φ14.5 (0.57)
D, d Front Suspension Crossmember Installation Hole (Lower) φ17 (0.67)
A005FEYE01
*1 Front
*2 mm
*3 (in.)