LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point J, j on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof Panel Corner | - |
| B, b | Quarter Panel Standard Hole | φ10 (0.39) |
| C, c | Luggage Compartment Door Opening Trough Corner | - |
| D, d | Quarter Panel Extension Corner | - |
| E, e | Quarter Panel Standard Hole | φ13 (0.51) |
| F, f | Quarter Panel Extension Corner | - |
| G, g | Rear Bumper Reinforcement Installation Nut | M8 (0.31) |
| H, h | Lower Back Panel Reinforcement Standard Hole | φ10 (0.39) |
| J, j | Luggage Compartment Door Lock Striker Installation Nut | M6 (0.24) |
| K, k | Rear Shock Absorber Installation Hole | φ25.5 (1.00) |
| L, l | Rear Absorber Mounting Bracket Standard Hole | φ10 (0.39) |
| M, m | Center Body Pillar Assembly Mark | - |
| *a | Distance between points other than those above | *b | mm (in.) |