FRONT DOOR THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Use point R, S when performing centering measurements for the body dimensions.

  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)

A, a Roof Panel Corner -
B, b Hood Hinge Installation Nut M8 (0.31)
C, c Front Door Hinge Installation Nut M8 (0.31)
D, d Front Door Hinge Installation Nut M8 (0.31)
E, e Front Body Pillar Assembly Mark -
F, f Front Body Pillar Assembly Mark -
G, g Front Body Pillar Assembly Mark -
H, h Rocker Panel Assembly Mark -
J, j Rocker Panel Assembly Mark -
K, k Roof Side Rail Assembly Mark -
L, l Center Body Pillar Assembly Mark -
M, m Center Body Pillar Assembly Mark -
N, n Front Door Lock Striker Installation Nut M8 (0.31)
O, o Rear Door Hinge Installation Nut M8 (0.31)
P, p Rear Door Hinge Installation Nut M8 (0.31)
Q, q Rocker Panel Assembly Mark -
R Computer Mounting Bracket Standard Hole φ10 (0.39)
S Center Floor NO.3 Plate Standard Hole

9X6

(0.35X0.24)

A01MAKAC01
*a Distance between points other than those above *b

mm

(in.)

A01MAPLC01
*a

mm

(in.)

- -