ROCKER OUTER PANEL CUT AND JOIN REPLACEMENT SECTIONS

A01MANW

  1. REMOVAL

    Symbol Meaning
    A01MATN Remove Weld Points
    A01MANE Cut and Join Location
    A01MAJ0 Cut Location for Supply Parts
    A01MAHSC01
    *a 100 mm (3.94 in.) - -
    A01MAQJ

  2. INSTALLATION

    Symbol Meaning
    A01MASW Plug Weld
    A01MAN9 Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A01MAP3C01
      *1 REAR PILLAR - -

    3. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.