FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A01MARN


  1. REMOVAL

    Symbol Meaning
    A01MATN Remove Weld Points
    A01MAH4 Remove Weld Points
    A01MANE Cut and Join Location
    A01MASIC01
    *A LH - -
    *a 40 mm (1.57 in.) - -

    1. Carefully cut the front side member inner so not to damage A.

      A01MAQPC01
      *A RH - -
      *1 FRONT SIDE MEMBER INNER - -
      *a 40 mm (1.57 in.) - -

  2. INSTALLATION

    Symbol Meaning
    A01MASW Plug Weld
    A01MASE Plug Weld
    A01MAN9 Butt Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A01MAOUC01
      *A LH - -
      *1 FRONT SIDE MEMBER INNER - -
      A01MAMNC01
      *A LH - -
      *1 FRONT SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY NO.2 *2 FRONT SIDE MEMBER EXTENSION
      A01MAMQC01
      *A RH - -
      *1 FRONT SIDE MEMBER INNER - -
      A01MAN0C01
      *A RH - -
      *1 FRONT SIDE MEMBER REINFORCE SUB-ASSEMBLY NO.2 *2 FRONT SIDE MEMBER EXTENSION

    2. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.