FRONT FENDER APRON ASSEMBLY REPLACEMENT

A01MAHO


  1. REMOVAL

    Symbol Meaning
    A01MATN Remove Weld Points
    A01MANR Remove Weld Points
    A01MAH4 Remove Weld Points

    1. After removing the A, remove the front fender apron sub-assembly.

      Tech Tips

      A is reused.

      A01MAMZC01
      *A LH - -
      *1 FRONT FENDER APRON SUB-ASSEMBLY - -
      A01MAI4C01
      *A LH - -

    2. After removing the A, remove the front fender apron sub-assembly.

      Tech Tips

      A is reused.

      A01MASDC01
      *A RH - -
      *1 FRONT FENDER APRON SUB-ASSEMBLY - -
      A01MAKBC01
      *A RH - -

  2. INSTALLATION

    Symbol Meaning
    A01MASW Plug Weld
    A01MAGF Plug Weld
    A01MASE Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    4. Weld the front fender apron sub-assembly to the vehicle side.

      A01MAKNC01
      *A LH - -
      *1 FRONT FENDER APRON SUB-ASSEMBLY - -
      A01MAU1C01
      *A LH - -

    5. Weld the A to the vehicle side.

      A01MAIKC01
      *A LH - -

    6. Weld the front fender apron sub-assembly to the vehicle side.

      A01MALHC01
      *A RH - -
      *1 FRONT FENDER APRON SUB-ASSEMBLY - -
      A01MATFC01
      *A RH - -

    7. Weld the A to the vehicle side.

      A01MAIXC01
      *A RH - -

    8. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    9. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.