ABOUT THIS VEHICLE STRUCTURAL OUTLINE

A01MAPYC01
A01MATO 1500 MPa Ultra High Strength Steel A01MAMW 980 MPa Ultra High Strength Steel
A01MAOJ 590 MPa High Strength Steel A01MAO0 440 MPa High Strength Steel
A01MAT8 340 MPa High Strength Steel A01MARU Aluminum
A01MAI7C02
A01MATO Foamed Sealing Material Application Areas (See the painting/coating) A01MARO Adhesive Application Area

  1. REPAIR OF HIGH DAMPING MASTIC SEALER AREAS

    High damping mastic sealer is used to improve quietness. When repairing areas with mastic sealer, always use high damping materials.


    1. High damping mastic sealer areas


      1. FRONT DOOR PANEL, REAR DOOR PANEL

        A01MALI

      2. ROOF PANEL

        A01MANP

  2. HIGH DAMPING MASTIC SEALER REPAIR MATERIALS


    1. Remove the materials from the vehicle to be repaired and reuse it.

    2. Use the designated repair material (foamed).

  3. REPAIR EXAMPLE


    1. When the roof panel is replaced


      1. Reference value

        A01MAN3C01
        *a 3 mm (0.118 in.) *b 5 mm (0.197 in.)

      2. Select a repair material that is 0 to 1 mm thick compared to the reference value for each gap between parts. Then apply adhesive (synthetic rubber based) to the reinforcement and install the roof panel.

        Tech Tips

        Cut the designated repair material to use it.

    2. When the high damping mastic sealer is removed during panel repair, etc.


      1. Reference value

        A01MALKC01
        *a 3 mm (0.118 in.) *b 4 mm (0.157 in.)
        *c 5 mm (0.197 in.) *d 6 mm (0.236 in.)
        *e 7 mm (0.276 in.) - -

      2. Apply adhesive (synthetic rubber based) to the gaps where sealer is removed.If the gap is narrow and sealer cannot be filled, apply repair materials around the surrounding area.