FRAME TWO-DIMENSIONAL DISTANCE


  1. Upper Face

    Tech Tips


    • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Body Mounting Hole φ26 (1.02)
    B, b Shock Absorber Installation Hole φ12.2 (0.48)
    C, c Body Mounting Hole φ31 (1.22)
    D, d Side Rail Inner Channel Standard Hole

    16X16

    (0.63X0.63)
    E, e Body Mounting Hole φ31 (1.22)
    F, f Body Mounting Hole φ65 (2.56)
    Wheel Base
    Wheel Base 2750 mm (108.27 in.)
    B002MKQC01
    *A FRONT *B LH
    *C RH - -
    *a

    mm

    (in.)

    		 - -
    B002MH1C01
    *a Imaginary Datum Line *b Height from Imaginary Datum Line
    *c

    mm

    (in.)

    		 - -
    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Side Rail Extension Inner Channel Standard Hole φ10 (0.39)
    B, b Side Rail Inner Front Channel Standard Hole φ10 (0.39)
    C, c Frame Side Front Rail Standard Hole φ11 (0.43)
    D, d Side Rail Inner Rear Channel Standard Hole φ10 (0.39)
    E, e Side Rail Inner Rear Channel Standard Hole φ10 (0.39)
    B002MPFC01
    *A FRONT *B LH
    *C RH - -
    *a

    mm

    (in.)

    		 - -
    B002MGTC01
    *a Imaginary Datum Line *b Height from Imaginary Datum Line
    *c

    mm

    (in.)

    		 - -

  2. Lower Face

    Tech Tips


    • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

    • In cases in which only one dimension is given, left and right are symmetrical.

    • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Bumper Reinforcement Installation Nut M10 (0.39)
    B, b Stabilizer Bracket Installation Nut M10 (0.39)
    C, c Suspension Lower Arm Installation Hole

    16.5X34.5

    (0.65X1.36)
    D, d Suspension Lower Arm Installation Hole

    16.5X34.5

    (0.65X1.36)
    E, e Side Rail Inner Front Channel Standard Hole φ10 (0.39)
    F, f Side Rail Inner Channel Standard Hole φ10 (0.39)
    G, g Side Rail Inner Rear Channel Standard Hole φ10 (0.39)
    H, h Suspension Lower Arm Installation Hole φ14.3 (0.56)
    J, j Suspension Upper Arm Installation Hole φ14.3 (0.56)
    K, k Bound Stopper Installation Nut M8 (0.31)
    L Lateral Control Rod Installation Hole φ12.2 (0.48)
    M, m Side Rail Inner Rear Channel Standard Hole φ10 (0.39)
    N, n Transport Hook Installation Nut M12 (0.47)
    Wheel Base
    Wheel Base 2750 mm (108.27 in.)
    B002MI2C01
    *A FRONT *B LH
    *C RH - -
    *a

    mm

    (in.)

    		 - -
    B002MGGC01
    *a Imaginary Datum Line *b Height from Imaginary Datum Line
    *c

    mm

    (in.)

    		 - -