BACK DOOR OPENING TROUGH CUT AND JOIN REPLACEMENT SECTIONS

B002MJM


  1. REMOVAL

    Symbol Meaning
    B002MPA Remove Weld Points
    B002MHS Cut with Disc Sander etc.
    B002MK8 Cut and Join Location
    B002MH6C01
    *a 40 mm (1.57 in.) - -

  2. INSTALLATION

    Symbol Meaning
    B002MIJ Plug Weld
    B002MP9 Fillet Weld
    B002MMD Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B002MNQC01
      *1 BACK DOOR OPENING SIDE FRAME SUB-ASSEMBLY - -
      *a 25 mm (0.98 in.) *b 20 mm (0.79 in.)
      *c 15 mm (0.59 in.) - -

    3. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.