ROCKER OUTER PANEL CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)

B002MN5

  1. REMOVAL

    Symbol Meaning
    B002MPA Remove Weld Points
    B002MK8 Cut and Join Location
    B002MP2 Cut Location for Supply Parts
    B002MONC01
    *a 100 mm (3.94 in.) - -
    B002MP6

  2. INSTALLATION

    Symbol Meaning
    B002MIJ Plug Weld
    B002MMD Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B002MO7C01
      *1 CENTER BODY PILLAR OUTER - -

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.