BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Back Door Hinge Installation Hole | φ16 (0.63) |
| B, b | Roof Side Inner Panel Corner | - |
| C, c | Back Door Damper Stay Installation Nut | M6 (0.24) |
| D, d | Quarter Panel Standard Hole | φ13 (0.51) |
| E, e | Lower Back Panel No.1 Gusset Corner | - |
| F, f | Quarter Panel Rear Extension Standard Hole | φ10 (0.39) |
| G, g | Body Installation Nut | M6 (0.24) |
| H, h | Back Door Lock Striker Installation Nut | M8 (0.31) |
| J | Rear Floor Pan Standard Hole | φ10 (0.39) |
| K, k | Center Body Pillar Assembly Mark | - |
| *a | mm (in.) |
- | - |