ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Fender Installation Nut | M6 (0.24) |
| B, b | Front Fender Installation Nut | M6 (0.24) |
| C, c | Hood Hinge Installation Nut | M8 (0.31) |
| D | Cowl Louver Installation Hole | 7X6.2 (0.28X0.24) |
| E, e | Radiator Upper Support Standard Hole | φ10 (0.39) |
| F, f | Front Fender Apron Standard Hole | φ10 (0.39) |
| G, g | Radiator Upper Center Support Installation Nut | M6 (0.24) |
| H, h | Radiator Support Service Hole | φ30 (1.18) |
| J | Hood Lock Center Support Installation Nut | M6 (0.24) |
| K, k | Radiator Upper Center Support Installation Nut | M6 (0.24) |
| L, l | Front Fender Apron Standard Hole | φ10 (0.39) |
| M, m | Front Fender Bracket Installation Nut | M6 (0.24) |
| N, n | Radiator Upper Support Standard Hole | φ7 (0.28) |
| *a | Distance between points other than those above | *b | Height from Imaginary Datum Line |
| *c | mm (in.) |
- | - |