FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A01RG2O


  1. REMOVAL

    Symbol Meaning
    B0049EM Remove Weld Points
    B0049FU Cut and Join Location

    1. Carefully cut the front side member inner so as not to damage A.

      A01RFWOC01
      *A LH *B RH
      *1 FRONT SIDE MEMBER INNER - -
      *a 5 mm (0.20 in.) *b 35 mm (1.38 in.)
      *c 20 mm (0.79 in.) - -
      A01RFYSC01
      *a 180 mm (7.09 in.) - -

  2. INSTALLATION

    Symbol Meaning
    B0049GS Plug Weld
    B0049HR Butt Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A01RG0BC01
      *A LH *B RH
      *1 FRONT SIDE MEMBER INNER *2 FRONT BUMPER MOUNTING REINFORCE SUB-ASSEMBLY
      A01RFVQC01
      *1 FRONT SIDE MEMBER PLATE OUTER *2 FRONT SIDE MEMBER SUPPORT
      *3 FRONT SIDE MEMBER REINFORCEMENT FRONT - -

    2. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.