BODY PANEL UNDERCOATING APPLICATION AREAS

CAUTION:

Work must be performed while wearing the appropriate protective gear and in a well-ventilated area.


  1. Apply undercoating to the chassis, floor underside, sheet metal fitting weld points of the body, and inside of the wheel house to prevent rust and noise, as well as protect the body from gravel.

    Note

    Do not coat high temperature areas, such as the tailpipe, or moving parts, such as the drive shaft.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean any dirt and oil from the application areas.

    • Cover the surrounding areas of the application areas with masking paper to avoid coating unnecessary areas.

    • Apply body sealer to the panel joints in advance.

    • Do not leave any gaps between the panel joints.

    • Referring to the notes above, undercoating should be applied according to the specifications for your country.


  1. for Passenger Side Manual Seat or Power Seat

    A01IE7SC01
    *A except models for Russia *B except VIP Captain Seat
    *C LH Side *D RH Side
    A01IE4SC01
    *A except models for Russia *B for VIP Captain Seat
    *C LH Side *D RH Side
    A01IE4EC01
    *A Models for Russia *B except VIP Captain Seat
    *C LH Side *D RH Side
    A01IE70C01
    *A Models for Russia *B for VIP Captain Seat
    *C LH Side *D RH Side

  2. for Passenger Side Super Long Slide Seat

    A01IE7KC01
    *A LH Side *B RH Side