BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.

B006JU2 Flat Finishing B006JTA No Flat Finishing
B006JP4C01
*A for Standard Roof *B for Sliding Roof
B006JR3
B006JTD
B006JTH
B006JQ1C01
*A for ALPHARD *B for VELLFIRE
B006JOO