REAR SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Rear Suspension Member Installation Hole | φ64 (2.52) |
| B, b | Rear Suspension Member Standard Hole | φ15 (0.59) |
| C, c | Rear Suspension Lower Arm Installation Hole | φ14.2 (0.56) |
| D, d | Rear Suspension Member Standard Hole | φ15 (0.59) |
| E, e | Rear Suspension Arm No. 2 Installation Hole | 29.2X19.2 (1.15X0.76) |
| F, f | Rear Suspension Member Installation Hole | φ75 (2.95) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those above | *b | mm (in.) |