BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Back Door Hinge Installation Hole | φ16 (0.63) |
| B, b | Quarter Panel Rear Extension Corner | - |
| C, c | Back Door Dumper Stay Installation Nut | M8 (0.31) |
| D, d | Roof Side Inner Panel Corner | - |
| E, e | Quarter Panel Standard Hole | φ13 (0.51) |
| F, f | Back Door Opening Trough Upper Corner Flame Standard Hole | φ13 (0.51) |
| G, g | Floor Side Rear Rail Corner | - |
| H, h | Scuff Plate Installation Hole | φ8.5 (0.33) |
| J, j | Back Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Rear Seat Leg No.2 Reinforcement Standard Hole | φ10 (0.39) |
| L, l | Center Body Pillar Assembly Mark | - |
| *a | Distance between points other than those above | *b | mm (in.) |