QUARTER WHEEL HOUSING OUTER PANEL ASSEMBLY REPLACEMENT

A01IEAH


  1. REMOVAL

    Symbol Meaning
    B006JOY Remove Weld Points
    B006JNW Remove Weld Points
    B006JQU Remove Weld Points

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A01IEDMC01
      *A LH - -
      B006JTL Adhesive - -

    2. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A01IEGAC01
      *A RH - -
      B006JTL Adhesive - -

  2. INSTALLATION

    Symbol Meaning
    B006JU9 Plug Weld
    B006JR6 Plug Weld
    B006JRV Plug Weld
    A01IEG9 Assembly Mark

    1. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A01IEC7C01
      *A LH - -
      B006JTL Adhesive - -

    2. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A01IE95C01
      *A LH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER *2 NO.3 LOWER RAIL PLATE INNER

    3. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A01IECZC01
      *A RH - -
      B006JTL Adhesive - -

    4. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

      A01IE5UC01
      *A RH - -
      *1 QUARTER WHEEL HOUSE PANEL OUTER *2 NO.3 LOWER RAIL PLATE INNER

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.