REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS

B006JPS


  1. REMOVAL

    Symbol Meaning
    B006JOY Remove Weld Points
    B006JPE Cut and Join Location
    B006JTQC02
    *a 220 mm (8.66 in.) - -

  2. INSTALLATION

    Symbol Meaning
    B006JU9 Plug Weld
    B006JOP Butt Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. If the entire supply part is not needed, remove the part of the supply part that is needed.

      B006JRXC02
      *1 REAR SIDE MEMBER REINFORCEMENT *2 REAR FLOOR SIDE MEMBER REAR

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.