REAR FLOOR REAR INNER CROSSMEMBER CUT AND JOIN REPLACEMENT SECTIONS (LARGE AREAS)

A01IE7U


  1. REMOVAL

    Symbol Meaning
    B006JOY Remove Weld Points
    B006JNW Remove Weld Points
    B006JQU Remove Weld Points
    A01IE7M

  2. INSTALLATION

    Symbol Meaning
    B006JOY Remove Weld Points
    B006JQU Remove Weld Points
    B006JU9 Plug Weld
    B006JR6 Plug Weld
    B006JRV Plug Weld
    B006JSM Body Sealer

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. If the entire supply part is not needed, remove the part of the supply part that is needed.

      A01IE64C01
      *1 BODY LOWER BACK PANEL SUB-ASSEMBLY INNER - -

    4. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

      A01IE5T
      A01IE9C

    5. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.