REAR FLOOR REAR CROSS OUTER PANEL ASSEMBLY REPLACEMENT

B006JS2

  1. REMOVAL

    Symbol Meaning
    B006JOY Remove Weld Points
    B006JNW Remove Weld Points
    B006JQU Remove Weld Points

    1. After removing the A, remove the B and C.

      B006JU5C01
      *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    B006JOY Remove Weld Points
    B006JU9 Plug Weld
    B006JR6 Plug Weld
    B006JRV Plug Weld
    B006JSM Body Sealer

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Remove A, B and C from the new parts.

      B006JR9C01
      *1 BODY LOWER BACK PANEL OUTER - -

    4. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

      B006JP5C01
      *A LH Side *B RH Side

    5. Weld the A and B to the vehicle side.

      B006JPQC01
      *A LH Side *B RH Side

    6. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

      A01IE9Z

    7. Weld the A to the vehicle side.

      B006JNYN01

    8. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    9. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.