BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.

A01RG31 Flat Finishing A01RG21 No Flat Finishing
A01RFYV
A01RG27C01
*A for LHD - -
A01RG65C01
*A for RHD - -
A01RG7C
A01RG0M
A01RG8N
A01RFZJ
A01RG29