REAR SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Rear Suspension Crossmember Installation Hole φ24 (0.94)
B, b Rear Suspension No. 1 Lower Arm Installation Hole φ12.2 (0.48)
C, c Stabilizer Bracket Installation Nut M12 (0.47)
D, d Rear Suspension No. 2 Lower Arm Installation Hole

23.1X14.2

(0.91X0.56)
E, e Rear Suspension Crossmember Installation Hole φ24 (0.94)
A01RG2PC01
*A FRONT *B LH
*C RH - -
*a

mm

(in.)

 - -