FRONT SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Suspension Lower Arm Installation Hole φ17.5 (0.69)
B, b Front Suspension Crossmember Installation Hole φ22 (0.87)
C, c Steering Gear Box Installation Hole φ17 (0.67)
D, d Front Suspension Crossmember Standard Hole φ24 (0.94)
A01RG4IC01
*A FRONT *B LH
*C RH - -
*a

mm

(in.)

 - -