REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT

A01RG1P


  1. REMOVAL

    Symbol Meaning
    B0049EM Remove Weld Points
    A01RFZR

  2. INSTALLATION

    Symbol Meaning
    B0049GS Remove Weld Points
    A01RG0J Assembly Mark

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. For positioning of the new parts, align the installation standard holes of the rear floor side member sub-assembly rear and the member.

      A01RFX0C01
      *1 REAR FLOOR SIDE MEMBER SUB-ASSEMBLY REAR - -
      A01RG6A

    3. After welding, apply undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.