REAR FLOOR PAN ASSEMBLY REPLACEMENT

A01RG48


  1. REMOVAL

    Symbol Meaning
    B0049EM Remove Weld Points
    A01RG8A
    A01RG2AC01
    *A LH Side - -
    A01RG4HC01
    *A RH Side - -

  2. INSTALLATION

    Symbol Meaning
    B0049GS Plug Weld

    1. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement assembly, spare wheel clamp bracket and weld bolts with the standard number of welding points.

      A01RG6DC01
      *A except Korea *B Upper Face
      *C Lower Face - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT ASSEMBLY
      *3 SPARE WHEEL CLAMP BRACKET *4 WELD BOLTS

    2. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement assembly, spare wheel clamp bracket, rear floor side member plate , fuel tube bracket No. 3, fuel tube bracket, fuel tube bracket No. 2 and weld bolts with the standard number of welding points.

      A01RG6PC04
      *A for Korea *B Upper Face
      *C Lower Face - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT ASSEMBLY
      *3 SPARE WHEEL CLAMP BRACKET *4 REAR FLOOR SIDE MEMBER PLATE
      *5 FUEL TUBE BRACKET NO. 3 *6 FUEL TUBE BRACKET
      *7 FUEL TUBE BRACKET NO. 2 *8 WELD BOLTS
      A01RG1M
      A01RFYJC01
      *A LH Side - -
      A01RG52C01
      *A RH Side - -

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.