BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.

A01FK11 Flat Finishing A01FJWG No Flat Finishing
A01FJY6
A01FK0IC02
*A for LHD - -
A01FJVVC02
*A for RHD - -
A01FK4X
A01FJYZ
A01FK1Q
A01FJU8
A01FK3L
A01FJXK
A01FK4W