REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS

A01FJWF


  1. REMOVAL

    Symbol Meaning
    A01FJXV Remove Weld Points
    A01FJUY Remove Weld Points
    A01FK1Z Cut and Join Location
    A01FK0VC01
    *A LH - -
    *a 60 mm (2.36 in.) - -
    A01FJWOC01
    *A RH - -
    *a 60 mm (2.36 in.) - -

  2. INSTALLATION

    Symbol Meaning
    A01FK6Y Plug Weld
    A01FJU6 Plug Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding the rear floor side member reinforcement sub-assembly rear to the vehicle side, install the rear floor side panel sub-assembly.

      A01FK2YC01
      *A LH - -
      *1 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR *2 REAR FLOOR SIDE PANEL SUB-ASSEMBLY

    3. After welding the rear floor side member reinforcement sub-assembly rear to the vehicle side, install the rear floor side panel sub-assembly.

      A01FK09C01
      *A RH - -
      *1 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR *2 REAR FLOOR SIDE PANEL SUB-ASSEMBLY

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.