FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A01FK67


  1. REMOVAL

    Symbol Meaning
    A01FJXV Remove Weld Points
    A01FK1Z Cut and Join Location
    A01FJZRC01
    *a 115 mm (4.53 in.) *b 50 mm (1.97 in.)

  2. INSTALLATION

    Symbol Meaning
    A01FK6Y Plug Weld
    A01FK45 Butt Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

      A01FK2SC01
      *1 FRONT SIDE MEMBER INNER *2 FRONT BUMPER ARM SUPPORT
      *3 FRONT SIDE MEMBER PLATE OUTER *4 FRONT SIDE MEMBER REINFORCEMENT NO.1

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting /coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.