ENGINE COMPARTMENT(for LHD) THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Fender Installation Nut | M6 (0.24) |
| B, b | Front Spring Support Installation Hole | φ13 (0.51) |
| C, c | Hood Hinge Installation Nut | M8 (0.31) |
| D | Cowl Top Panel Center Mark | - |
| E, e | Front Side Member Standard Hole | φ15 (0.59) |
| F, f | Front Side Member Standard Hole | φ15 (0.59) |
| G, g | Radiator Support Upper Installation Nut | M6 (0.24) |
| H, h | Front Bumper Mounting Reinforcement Installation Nut | M10 (0.39) |
| J | Hood Lock Support Brace Installation Nut | M6 (0.24) |
| K, k | Radiator Support to Front Fender Bracket Standard Hole | φ10 (0.39) |
| L, l | Radiator Support Upper Installation Nut | M6 (0.24) |
| M, m | Radiator Support Extension Standard Hole | φ10 (0.39) |
| N, n | Front Fender Installation Nut | M6 (0.24) |
| O, o | Radiator Support Standard Hole | φ10 (0.39) |
| *a | Height from Imaginary Datum Line | *b | Distance between points other than those above |
| *c | mm (in.) |
- | - |