BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.

A01OGAS Flat Finishing A01OGBJ No Flat Finishing
A01OGAR
A01OGA9C01
*A for LHD - -
A01OGA5C01
*A for RHD - -
A01OGAH
A01OG9R
A01OGAI
A01OGAK
A01OGBO
A01OGB1
A01OGAD