QUARTER PANEL END HOUSING ASSEMBLY REPLACEMENT

A01F5QQ


  1. REMOVAL

    Symbol Meaning
    A01OGBQ Remove Weld Points
    A01F62J Remove Weld Points
    A01OGB2 Remove Weld Points

    1. Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

      Tech Tips

      In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.

      A01F5W5C01
      A01F5YM Adhesive - -

  2. INSTALLATION

    Symbol Meaning
    A01OG9N Plug Weld
    A01F609 Plug Weld
    A01OG9X Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Apply adhesive (3MTMAutomixTMPanel Bonding Adhesive #8115).

      Tech Tips


      • Apply a light coat of adhesive around the plug welding points.

      • Apply enough adhesive to the panels.

      A01F5PJC01
      A01F5YM Adhesive - -

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.