REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS

A01F5YY


  1. REMOVAL

    Symbol Meaning
    A01OGBQ Remove Weld Points
    A01OGB2 Remove Weld Points
    A01F5R3 Cut and Join Location
    A01F5YJC01
    *A LH - -
    *a 60 mm (2.36 in.) - -
    A01F5YHC01
    *A RH - -
    *a 60 mm (2.36 in.) - -

  2. INSTALLATION

    Symbol Meaning
    A01OG9N Plug Weld
    A01OG9X Plug Weld
    A01F5QP Assembly Mark

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding the rear floor side member reinforcement sub-assembly rear to the vehicle side, install the rear floor side panel sub-assembly.

      A01F5WJC01
      *A LH - -
      *1 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR *2 REAR FLOOR SIDE PANEL SUB-ASSEMBLY
      A01F608C01
      *A LH *B w/o Dynamic Rear Steering
      *C w/ Dynamic Rear Steering - -

    3. After welding the rear floor side member reinforcement sub-assembly rear to the vehicle side, install the rear floor side panel sub-assembly.

      A01F5YGC01
      *A RH - -
      *1 REAR FLOOR SIDE MEMBER REINFORCEMENT SUB-ASSEMBLY REAR *2 REAR FLOOR SIDE PANEL SUB-ASSEMBLY

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.