CAUTION LABEL ATTACHMENT POSITION
-
After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.
Tech Tips
-
Make sure the caution label is not attached over a spot weld.
-
When attaching the caution label, make sure not to touch the label's adhesive surface.
-
To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.
-
If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.
-
| *1 | ENGINE LLC LABEL | *2 | COOLER SERVICE CAUTION LABEL |
| *3 | EMISSION CONTROL INFORMATION LABEL | *4 | ENGINE CAUTION LABEL |
| *5 | BATTERY LOCATION LABEL | *6 | HV LLC LABEL |
| *7 | CHILD PROTECTOR INFORMATION LABEL | *8 | FUEL LABEL |
| *A | for LHD | *B | for RHD |
| *1 | SIDE AIR BAG CAUTION LABEL | *2 | DIFFERENTIAL NOTICE LABEL (for 4WD) |
| *3 | NAME PLATE | *4 | TIRE PRESSURE INFORMATION LABEL |
| *5 | CR LABEL | *6 | COMPLIANCE PLATE |