REAR FLOOR UPPER CENTER CROSSMEMBER ASSEMBLY REPLACEMENT

A01CSV6

  1. REMOVAL

    Symbol Meaning
    B002GA9 Remove Weld Points
    A01CSNX Cut with Disc Sander etc.

    1. After removing the A, remove the B.

      A01CST4N01
      A01CSHPC01
      *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    B002GA9 Remove Weld Points
    B002GBI Plug Weld
    B002GAP Plug Weld

    1. Remove A from a new side member to floor reinforce sub-assembry.

      A01CSLCC01
      *1 SIDE MEMBER TO FLOOR REINFORCE SUB-ASSEMBLY - -

    2. After welding the A to the vehicle side, install the B.

      A01CSNJN01
      A01CSHYC01
      *A LH Side *B RH Side
      *a 20 mm (0.79 in.) - -

    3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.