REAR FLOOR PAN ASSEMBLY REPLACEMENT

A01CSKI


  1. REMOVAL

    Symbol Meaning
    B002GA9 Remove Weld Points
    B002GBL Remove Weld Points
    B002G8M Remove Weld Points
    A01CSIB
    A01CSOYC01
    *A LH Side *B RH Side

  2. INSTALLATION

    Symbol Meaning
    B002GBI Plug Weld
    B002G9Z Plug Weld
    B002GAP Plug Weld
    B002G9N Fillet Weld

    1. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.1, rear floor croosmember bracket, rear floor panel reinforcement No.2, rear floor pan extension, sub floor plate, battery bracket sub-assembly front and battery carrier panel rear with the standard number of welding points.

      A01CSP5C01
      *A w/o Spare Tire *B Upper Face
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT NO.1
      *3 REAR FLOOR CROSSMEMBER BRACKET *4 REAR FLOOR PANEL REINFORCEMENT NO.2
      *5 REAR FLOOR PAN EXTENSION *6 SUB FLOOR PLATE
      *7 BATTERY BRACKET SUB-ASSEMBLY FRONT *8 BATTERY CARRIER PANEL REAR

    2. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement No.1, rear floor croosmember bracket, rear floor panel reinforcement No.2, rear floor pan extension, sub floor plate, battery bracket sub-assembly front, battery carrier panel rea and spare wheel clamp bracket with the standard number of welding points.

      A01CSRYC01
      *A w/ Spare Tire *B Upper Face
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT NO.1
      *3 REAR FLOOR CROSSMEMBER BRACKET *4 REAR FLOOR PANEL REINFORCEMENT NO.2
      *5 REAR FLOOR PAN EXTENSION *6 SUB FLOOR PLATE
      *7 BATTERY BRACKET SUB-ASSEMBLY FRONT *8 BATTERY CARRIER PANEL REAR
      *9 SPARE WHEEL CLAMP BRACKET - -

    3. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement and weld bolts with the standard number of welding points.

      A01CSNQC01
      *A Lower Face - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT
      *3 WELD BOLTS - -
      A01CSP2
      A01CSTCC01
      *A LH Side *B RH Side

    4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.