FRONT SIDE MEMBER ASSEMBLY REPLACEMENT

B002G8X


  1. REMOVAL

    Symbol Meaning
    B002GA9 Remove Weld Points
    B002G9TC01
    *A LH - -
    B002GAJC01
    *A LH - -
    B002GAGC01
    *A RH - -
    B002GACC01
    *A RH - -

  2. INSTALLATION

    Symbol Meaning
    B002GBI Plug Weld
    B002G9N Fillet Weld

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    3. Weld the front side member inner to the vehicle side.

      B002G8IC01
      *A LH - -
      *1 FRONT SIDE MEMBER INNER - -

    4. Weld the front side member sub-assembly outer to the vehicle side.

      B002GAVC01
      *A LH - -
      *1 FRONT SIDE MEMBER SUB-ASSEMBLY OUTER - -
      *a 45 mm (1.77 in.) *b 16 mm (0.63 in.)

    5. Weld the front side member inner to the vehicle side.

      B002G95C01
      *A RH - -
      *1 FRONT SIDE MEMBER INNER - -

    6. Weld the front side member sub-assembly outer to the vehicle side.

      B002G9XC01
      *A RH - -
      *1 FRONT SIDE MEMBER SUB-ASSEMBLY OUTER - -
      *a 45 mm (1.77 in.) *b 16 mm (0.63 in.)
      *c 13 mm (0.51 in.) - -

    7. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting /coating)

    8. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.