REAR SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Rear Suspension Crossmember Installation Hole φ24 (0.94)
B, b Rear Suspension Lower Arm No.1 Installation Hole

24.1X15.2

(0.95X0.60)
C, c Rear Suspension Lower Arm No.2 Installation Hole φ12.4 (0.49)
D, d Rear Suspension Crossmember Installation Hole φ22.5 (0.89)
A01CSVBC01
*A FRONT *B LH
*C RH - -
*a Distance between points other than those above *b

mm

(in.)