OTHER REFERENCE VALUES TWO-DIMENSIONAL DISTANCE
Info Added 2017-09-27 
| *A | LH | *B | RH |
| *a | Front Bumper Reinforcement Installation | *b | Front Spring Support Installation |
| *c | mm | - | - |
| *A | FRONT | - | - |
| *a | Blind Spot Monitor Sensor Bracket Installation | *b | Rear Bumper |
| *c | 90° +/- 5° | *d | Imaginary Datum Line |
| *e | 20° +/- 4° | *f | 29 to 42 |
| *g | Measure by temporarily placing a bolt of the same height as the stud bolt | *h | Measured from the base of the stud bolt and bolt hole edge |
| *i | mm | - | - |
| *A | FRONT | - | - |
| *a | Blind Spot Monitor Sensor Bracket Installation | *b | Rear Bumper |
| *c | 90° +/- 5° | *d | Imaginary Datum Line |
| *e | 20° +/- 4° | *f | 29 to 42 |
| *g | Measure by temporarily placing a bolt of the same height as the stud bolt | *h | Measured from the base of the stud bolt and bolt hole edge |
| *i | mm | - | - |
| *a | Blind Spot Monitor Sensor Bracket Installation | *b | 20° +/- 4° |
| *c | 90° +/- 5° | *d | Imaginary Datum Line |
| *e | mm | - | - |