FRONT FENDER APRON ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A002667 Remove Weld Points
    A00265J Remove Weld Points
    A00265D Remove Weld Points
    A00266X Cut with Disc Sander etc.
    A018MI8
    A018MMX

  2. INSTALLATION

    Symbol meaning
    A00266T Plug Weld
    A00266S Plug Weld
    A002652 Plug Weld
    A00265P Fillet Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. When welding *a, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    4. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A018MMUC01
    *1 FRONT FENDER APRON SUB-ASSEMBLY - -
    A018MMHC01
    *b mm (in.) - -
    A018MOGC01
    *A LH *B RH