REAR FLOOR PAN ASSEMBLY REPLACEMENT

A003JNW


  1. REMOVAL

    Symbol Meaning
    B006H4P Remove Weld Points
    A003JHV
    A003JGXC01
    *A LH Side - -
    A003JRTC01
    *A RH Side - -

  2. INSTALLATION

    Symbol Meaning
    B006H2T Plug Weld

    1. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement assembly, rear floor plate, plate rear floor bracket and weld bolts with the standard number of welding points.

      A003JHYC01
      *A except Korea *B Upper Face
      *C Lower Face - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT ASSEMBLY
      *3 REAR FLOOR PLATE *4 PLATE REAR FLOOR BRACKET
      *5 WELD BOLTS - -

    2. Before temporarily installing the new parts, weld the rear floor pan, rear floor panel reinforcement assembly, rear floor plate, plate rear floor bracket, fuel tube bracket No. 3, fuel tube bracket, fuel tube bracket No. 2 and weld bolts with the standard number of welding points.

      A003JJNC02
      *A for Korea *B Upper Face
      *C Lower Face - -
      *1 REAR FLOOR PAN *2 REAR FLOOR PANEL REINFORCEMENT ASSEMBLY
      *3 REAR FLOOR PLATE *4 PLATE REAR FLOOR BRACKET
      *5 FUEL TUBE BRACKET NO. 3 *6 FUEL TUBE BRACKET
      *7 FUEL TUBE BRACKET NO. 2 *8 WELD BOLTS
      A003JOD
      A003JPQC01
      *A LH Side - -
      A003JJRC01
      *A RH Side - -

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.