BACK DOOR OPENING TROUGH ASSEMBLY REPLACEMENT

A003JUJ


  1. REMOVAL

    Symbol Meaning
    B006H4P Remove Weld Points
    B006H4A Remove Weld Points
    B006H2X Remove Weld Points
    A003JSO
    A003JQ5C01
    *A w/o Blind Spot Monitor System *B w/ Blind Spot Monitor System

  2. INSTALLATION

    Symbol Meaning
    A003JPR Spot Weld
    B006H2T Plug Weld
    B006H3U Plug Weld
    B006H53 Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      A003JH5C01
      *1 BACK DOOR OPENING TROUGH - -
      A003JITC01
      *A w/o Blind Spot Monitor System *B w/ Blind Spot Monitor System
      *1 SIDE PANEL REAR END POST PLATE LOWER - -

    3. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.