BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A | Back Door Hinge Installation Hole | φ11 (0.43) |
| a | Back Door Hinge Installation Hole | 16X10 (0.63X0.39) |
| B | Roof Panel Center Mark | - |
| C, c | Back Door Damper Stay Installation Nut | M6 (0.24) |
| D, d | Back Door Side Stopper Installation Nut | M6 (0.24) |
| E, e | Quarter Panel Standard Hole | φ13 (0.51) |
| F, f | Roof Side Inner Front Panel Corner | - |
| G, g | Rear Bumper Reinforcement Installation Nut | M8 (0.31) |
| H, h | Back Door Opening Trim Installation Hole | φ8.5 (0.33) |
| J, j | Back Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Center Floor Panel Reinforcement Standard Hole | φ10 (0.39) |
| L, l | Center Body Pillar Assembly Mark | - |
| *a | Distance between points other than those above | *b | mm (in.) |