UNDER BODY REFERENCE VALUES (for 2WD) THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Measure points with the engine under No. 1 cover removed.

  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Engine Under No. 1 Cover Installation Hole φ7 (0.28)
B, b Front Suspension Crossmember Installation Bolt M14 (0.55)
C, c Front Suspension Crossmember Installation Bolt M14 (0.55)
D, d Front Side Member No. 5 Reinforcement Standard Hole φ18 (0.71)
A00WGMAE01